Redstone circuits
Proven redstone builds with a 3D preview and a material list – from logic gates to piston doors. Download them as a structure file, or show them as a ghost template in your world with the Cubiq Client.
- Basics
NOT gate (inverter)
The lever powers the block, and a redstone torch on the side of a powered block turns off. So the lamp is on while the input is off – and the other way round. The building block for almost every other gate.
Easy5 blocksMinecraft 1.8+
- Basics
OR gate
Both inputs simply join the same redstone line: if either lever is on, the lamp lights up. Use it to control one door or lamp from several places.
Easy5 blocksMinecraft 1.8+
- Basics
AND gate
Each input switches off the torch on top of its block. Only when both torches are off does the line between them go dark, and the output torch on the middle block lights up. Needs both inputs – for example two buttons for a vault.
Medium10 blocksMinecraft 1.8+
- Basics
XOR gate
Two comparators in subtract mode: each gets its own input from behind and the other input from the side. With exactly one input on, one comparator outputs; with both on, both subtract to 0. The classic for a light you switch from two places.
Tricky23 blocksMinecraft 1.8+
- Basics
Repeater chain
Redstone dust loses one signal level per block, so after 15 blocks the signal is gone. A repeater refreshes it back to 15. For long lines, put a repeater at least every 15 blocks – each one adds a small delay.
Easy16 blocksMinecraft 1.8+
- Basics
Signal upwards (torch tower)
Blocks and redstone torches stacked alternately: each torch powers the block above it and inverts the signal. With an even number of torches the top gets the same signal as the bottom. A compact way to send a signal straight up.
Medium10 blocksMinecraft 1.8+
- Clocks
Observer clock
Two observers watching each other: when one pulses, the other sees the change and pulses back. This is the fastest simple clock. It starts when the second observer is placed; break one to stop it. Great for flying machines and farms.
Easy3 blocksMinecraft 1.11+
- Clocks
Repeater clock
Four repeaters in a loop: a short pulse from the button runs around the ring forever. Its speed is the sum of all repeater delays (here 4 × 4 ticks ≈ 1.6 s per round). To stop it, break a piece of dust for a moment.
Medium19 blocksMinecraft 1.8+
- Clocks
Comparator clock
A comparator in subtract mode feeds its own output back into its side. The output keeps subtracting itself away, so it flickers very fast as long as the lever is on. Tiny and easy to switch on and off.
Medium7 blocksMinecraft 1.8+
- Memory
RS latch (memory cell)
Two torches that keep each other in check: S (set) switches the output on, R (reset) switches it off, and the state stays when the lever goes back. Remembers one bit – for example “is the farm running?”.
Medium13 blocksMinecraft 1.8+
- Memory
T flip-flop (repeater locks)
Every button press toggles the lamp. Two repeaters work as a memory pair: while the button is held, the first takes the inverted output; when it is released, the second copies it. Works in every version from 1.8 – no pistons, no quasi-connectivity.
Tricky25 blocksMinecraft 1.8+
- Memory
T flip-flop (copper bulb)
A copper bulb toggles its light with every new signal. A comparator reads the bulb and outputs 15 while it is lit. The easiest toggle from Minecraft 1.21 on – wax the bulb so it does not oxidize.
Easy4 blocksMinecraft 1.21+
- Memory
D latch
While E (enable) is on, the output follows D. When E is off, a torch locks the data repeater from the side and the output keeps its last value. Stores a value at exactly the moment you choose.
Medium7 blocksMinecraft 1.8+
- Pulses
Monoflop (short pulse on switch-on)
The input reaches the comparator at once from behind and a little later from the side through a repeater. In subtract mode the output is only on in between – one short pulse, however long the lever stays on. Set the length with the repeater delay.
Medium8 blocksMinecraft 1.8+
- Pulses
Edge detector (observer)
An observer watches the redstone line: it notices every change and gives a short pulse – when the lever is switched on and again when it is switched off. Needs Minecraft 1.11 or newer.
Easy4 blocksMinecraft 1.11+
- Pulses
Falling-edge detector
Like the monoflop the other way round: the comparator gets the delayed signal from behind and the fast one from the side. Only when the input switches off is the side already empty while the back is still on – that makes one short pulse.
Medium10 blocksMinecraft 1.8+
- Pulses
Pulse extender
The button signal goes straight to the output and, in parallel, through two slow repeaters. The output stays on until the delayed copy is over too – a 1 s press becomes about 1.8 s. Add repeaters for longer pulses. The repeater in the direct path stops the signal from running backwards.
Medium11 blocksMinecraft 1.8+
- Doors
2×2 piston door
Four sticky pistons hold the door blocks in the opening. Torches keep them powered; a pressure plate powers the line under the floor, the torches go out and the pistons pull the blocks into the walls. Build walls around the pistons and hide the dust under the floor.
Medium40 blocksMinecraft 1.8+
- Doors
Hidden staircase (simple)
Three sticky pistons with redstone dust on top form a staircase of dust. Flip the lever and every piston pushes its step one block out of the wall; flip it back and the steps disappear into the wall. Build the wall flush with the step blocks.
Medium11 blocksMinecraft 1.8+
- Farm basics
Sugar cane farm cell
An observer watches the spot where the second sugar cane block grows. As soon as it appears, the observer pulses and a piston breaks it; the bottom block keeps growing. Put hoppers or a water stream below to collect the drops and line up many cells side by side.
Easy14 blocksMinecraft 1.11+
- Farm basics
Item filter (sorter cell)
The filter hopper holds 18 of the item to sort in its first slot and one renamed placeholder item in each other slot. That gives comparator strength 1 – not enough to reach the repeater. A 19th matching item makes it 2: the torch goes out, the lower hopper unlocks, pulls one item into the chest and locks again. Other items travel on along the hopper line on top.
Tricky31 blocksMinecraft 1.8+
- Farm basics
Automatic furnace
Items from the top chest drop into the furnace from above, fuel comes in from the side, and the smelted results fall out below into a chest. No redstone needed – the classic basis for bigger furnace arrays.
Easy7 blocksMinecraft 1.8+
- Farm basics
Item elevator (bubble column)
Soul sand under water sources makes a bubble column that pushes items upwards. Throw items through the sign at the bottom – signs keep the water in but let items pass. At the top, flowing water carries them over a hopper into the chest. Bubble columns need Minecraft 1.13 or newer.
Medium36 blocksMinecraft 1.13+
- Displays
Fill level display
A comparator reads how full the chest is (0–15) and sends that strength along a redstone line. The line gets weaker with every block, so the fuller the chest, the more lamps light up (one lamp per two levels). Glowstone between the lamps keeps them from lighting each other.
Easy32 blocksMinecraft 1.8+
- Displays
Night light
An inverted daylight detector gives a signal at night. The redstone line on top of the lamps switches them on automatically in the dark and off again in the morning. Right-click the detector to invert it.
Easy8 blocksMinecraft 1.8+
In the game with the Cubiq Client
Open the circuit library in the Cubiq Client (Redstone tools → Circuits). Place a circuit as a ghost template, build it layer by layer and let the client check every block. New circuits arrive without a mod update.